The Compleat Sculptor Spray Gun

The Compleat Sculptor
" You supply the talent, we'll supply the rest!" Since 1995

G100-6 Gelcoat & Resin Spray Gun (Cup Gun)
Pistola de rociar resina y "Gelcoat"
Modelo G100 (Pistola de Copa)

"The Dump Gun"

A great name for a great tool. This gravity feed sprayer can be used for a variety of materials. From paint to plaster, from resin to rubber. With our largest nozzle, it will even sand blast.

This gun is used for spraying not only gelcoat and resins, but other materials such as parting films, spray gypsum, tooling gelcoats, sand able primers, granite enhanced gelcoats, adhesives and paints. This professional grade sprayer is a must for every fiberglass, composite and cultured marble shop. The easy to clean design means clean up times less than five minutes. Wipe the lid and nozzle, through away the cup, and you're ready to go again. We have also designed the gun to work with standard paper cups. "Take a Dump Today"

Order #	Description	Price	Buy Now
196G100	AIR POWERED GELCOAT/ RESIN GUN Complete with FN6 nozzles, lid, plastic cup, paper cup and cup liner	$149.99
196FN1	1/32" (0.8MM) Fluid Nozzle	$17.99
196FN2	1/16" (1.6MM) Fluid Nozzle	$17.99
196FN3	3/32" (2.4MM) Fluid Nozzle	$17.99
196FN4	1/8" (3.2MM) Fluid Nozzle	$17.99
196FN5	5/32" (4.0MM) Fluid Nozzle	$17.99
196FN6	3/16" (4.8MM) Fluid Nozzle	$17.99
196FN7	7/32" (5.5MM) Fluid Nozzle	$17.99
196FN8	1/4" (6.3MM) Fluid Nozzle	$17.99
196FN9	9/32" (7.1MM) Fluid Nozzle	$17.99
1961132	Paper Cups (Package of 25)	$25.50

Esta rociadora de grado profecional debe de tenerse en todo taller de fibra de vidrio, compositos, y marmol artificial. Esta pistola es usada no solamente para resinas y "gelcoats" sino para otros materiales como películas separadoras (PVA), "Gypsum", gel coat con granitos, adhesivos, y pinturas. Con nuestra boquilla mas grande puede hasta limpia por chorro de arena. El diseño de limpieza fácil permite limpiar en menos de cinco minutos. Frotando la tapa, la boquilla, y el vaso plástico, estará listo otra vez. También diseñamos la pistola para trabajar con copas de papel. Esta pistola liviana, alimentada por medio de un vacío (no gravedad), es la mas común en la industria mundialmente para rociar resinas y gel coat simple y eficiente. Nuestra boquillas de latón hechas a precisión vienen en 9 tamaños diferentes y generan un patente de rociar mejor que otras pistolas que no generan suficiente aire o un vacío.Construcción de aluminio (no plástico) asegura que dure mas y es superior a sus competidores en todo.Construidos con un control de flujo (diseño válvula de aguja) para medir precisamente el volumen de la resina o gel coat. Anillos "EP" de larga vida son resistente a los solventes.Viene completo con una copa de papel de trabajo fuerte, una copa plástica graduada, y nuestro exclusivo forro plástico. (Copas de papel Sweetheart P4325 y Solo 320 caven en la pistola) Tapa enroscada de aluminio acepta nuestras boquillas de precision. (No de plastico moldeado)

PART NUMBER	DESCRIPTION	Price	Buy Now !
196G100	AIR POWERED GELCOAT/ RESIN GUN Complete with FN6 nozzles, lid, plastic cup, paper cup and cup liner	$149.99
196FN1	1/32" (0.8MM) FLUID NOZZLE	$13.00
196FN2	1/16" (1.6MM) FLUID NOZZLE	$13.00
196FN3	3/32" (2.4MM) FLUID NOZZLE	$13.00
196FN4	1/8" (3.2MM) FLUID NOZZLE	$13.00
196FN5	5/32" (4.0MM) FLUID NOZZLE	$13.00
196FN6	3/16" (4.8MM) FLUID NOZZLE	$13.00
196FN7	7/32" (5.5MM) FLUID NOZZLE	$13.00
196FN8	1/4" (6.3MM) FLUID NOZZLE	$13.00
196FN9	9/32" (7.1MM) FLUID NOZZLE	$13.00
1961132	Paper Cups (Package of 25)	$22.25

NEW EZ-Spray 45 Urethane Rubber case of 3 cartridges (1500 ml)

Order #	Price	Buy Me
6602959	$125.99

EZ~Spray® 45 is a polyurethane rubber for spraying through the EZ~Spray® Junior Cartridge System. EZ~Spray® 45 can be sprayed onto vertical surfaces for making molds or is good for making fast molds of large surface areas. After a suitable thickness is attained, EZ~Spray® 45 cures overnight with negligible shrinkage to a durable mold rubber.

Application of a support shell is achieved by spraying Smooth-On's EZ~Spray® Plastic over the rubber mold after it has fully cured. EZ~Spray® 45 is suitable for casting a variety of materials including wax, gypsum, urethane/epoxy resins, concrete, etc.

Yield - Each cartridge contains 3.75 lbs. (1.7 kgs.) of material. Assuming a thickness of 3/8" inch (0.95 cm), one cartridge of EZ~Spray® 45 will cover approximately 1.875 sq. ft. (0.17 square meters)

NEW EZ-Spray Silicone 35 Rubber case of 5 cartridges (1500 ml)

For making fast sprayed rubber molds that have the best release properties for production casting of resins, plaster, etc. Minimal surface preparation required.

Order #	Price	Buy Me
6602963	$244.99

EZ Spray^® Silicone 35 is a platinum cure Silicone 35 rubber developed specifically for spraying through the EZ~Spray^® Junior Cartridge System.

With no or minimal surface preparation, EZ Spray^® Silicone 35 can be sprayed onto vertical surfaces for making fast rubber molds of large surface areas. After a suitable thickness is attained, EZ Spray^® Silicone 35 cures in 1 hour with negligible shrinkage to a durable mold rubber good for production casting resins, foams, concrete, plaster and other materials.

Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/8 inches (0.95 cm), one cartridge of EZ~Spray^® Silicone 35 will cover approximately 1.66 sq. ft. (0.15 square meters).

NEW EZ-Spray StyroCoat case of 3 cartridges (500 ml)

Order #	Price	Buy Me
6602962	$125.99

StyroCoat® Plastic is a sprayable polyurethane plastic formulated to economically coat a variety of surfaces. Dispensed through Smooth-On's EZ~Spray®, Jr. cartridge system, the plastic cures in about 2 seconds and can be applied to vertical surfaces without running off. An advantage of the system is that large areas can be covered in a short period of time. Cured plastic is lightweight, impact resistant, and water resistant. It can be sanded for priming and painting. Plastic can also be sprayed into a rubber mold to make fast, impact resistant castings (application of a release agent may be necessary before spraying into the mold).

StyroCoat® Plastic is used for theme design / fabrication applications, making movie and theater set environments, making surfaces water resistant and other industrial applications.

Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 0.1 inches (0.25 cm), one cartridge of StyroCoat® Plastic will cover approximately 6.43 sq. ft. (0.6 square meters)

NEW EZ-Spray Rigid Foam case of 3 cartridges (1500 ml)

Order #	Price	Buy Me
6602961	$125.99

EZ~Spray® Foam is a polyurethane foam compound that can be conveniently sprayed using Smooth-On’s EZ~Spray® Junior System.

Foam cures quickly to strong, lightweight and impact resistant 12 lb. rigid foam that can be used for a variety of applications including making lightweight castings. Foam can also be sprayed over certain rubber mold configurations as a mother mold material.

Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/16 of an inch (.45 cm), expanding to about 1 inch (2.54 cm) thickness, one cartridge of EZ~Spray® Foam will cover approximately 3.75 sq. ft. (0.35 square meters)

EZ-Spray Urethane Plastic case of 3 cartridges (1500 ml)

Order #	Price	Buy Me
6601960	$132.99

EZ~Spray Plastic® is a sprayable polyurethane plastic compound.

With high impact resistance, this spray plastic was specifically formulated to be mixed and sprayed via Smooth-On’s EZ~Spray Jr. Spray System.EZ~Spray Plastic® is versatile and can be sprayed over a rubber mold to create “mother molds” or support shells. It can also be sprayed or meter mixed into rubber molds as a fast setting casting resin.

Cured plastic is lightweight, tough and durable. EZ~Spray Plastic® has a fast gel time for vertical surface application. Material cures in about 3 hours (depending on mass)

Yield - Each cartridge contains 3.75 lbs. (1.7 kgs) of material. Assuming a thickness of 3/8" inch (0.95 cm), one cartridge of EZ-Spray® Plastic will cover approximately 1.71 sq. ft. (0.6 square meters)

Image Not Available

NEW EZ-Spray Flex-Foam case of 3 cartridges (1500 ml)

EZ~Spray® FlexFoam is a flexible polyurethane foam compound that can be conveniently sprayed using Smooth-On’s EZ~Spray Junior System.

Order #	Price	Buy Me
6602958	$125.99

"EZ Spray Junior"
	If making a mold of an exceptionally large model or making large molds on a regular basis, you may want to consider investing in a machine that will spray mold rubber (such as the EZ Spray system). Smooth-On customers have been spraying mold rubber since the late 1970's. The Advantages Of Spraying Mold Rubber: Mold rubber is mixed and dispensed by machine automatically.
It is applied to the model surface in a uniform thickness in a fraction of the time it takes one or more people to brush-on the mold rubber by hand. The labor and time associated with mixing and applying is greatly reduced.